This Is the FRITZ!Powerline 510E Set
This quick introduction shows you the possibilities for deploying and operating the
FRITZ!Powerline 510E Set. Comprehensive information is presented in the PDF manual
available on our website en.avm.de/service.
With the FRITZ!Powerline 510E Set you can transmit data over the electrical wiring in
your household. Via this connection your network devices can conveniently exchange
data, and can access your home network and connect to your Internet router.
To launch operation, insert the FRITZ!Powerline devices in any outlets and connect
them with your FRITZ!Box, your computer and other network devices – that's all.
With the AVM FRITZ!Powerline software you manage your powerline network and can
view detailed information about connections.
As the FRITZ!Powerline 510E Set is preconfi gured and encrypted upon delivery, it is
ready for immediate use.
Have fun with your FRITZ!Powerline 510E!
6
Optimizing the Data Rate
A powerline network is infl uenced by many factors. With the following steps you can
contribute to an optimal data rate in your powerline network:
Avoid using multi-outlet strips and insert powerline devices directly into wall
outlets.
If you have to use multi-outlet strips, then
– use multi-strip outlets without surge protection
– connect as few devices as possible to the multi-outlet strip
– insert your powerline device in the fi rst socket, directly at the cable
If you cannot avoid using multi-outlet strips without surge protection, then
–
the surge protection should be located behind the powerline device
The data rate in a powerline network drops
– for connections over multiple phases
– when junction boxes are located on the path between your powerline devices
– when the connection has to pass through a circuit breaker, dimmer or electri-
cal ballast
– whenever power drills or vacuum cleaners are used
Attempt to minimize these infl uences.
The quality of your powerline network can also be managed and optimized using
the AVM FRITZ!Powerline software.
7