flir Lorex LNZ32P12 Serie Manual De Instrucciones página 13

4 Installation
8. Re-attach the dome cover, ensuring that the rubber O-ring around the camera base is
in place and the alignment arrow* on the dome cover lines up with the camera base.
9. Tighten the dome cover screws (x3) using the included Allen key.
10. Loosen the security screw* on the wall mount bracket.
11. Connect the camera to the cabling in the wall mount bracket. See 3 Connecting the
Camera, page 3 for full connection instructions.
12. Twist the pendant cap onto the wall mount bracket. Tighten the security screw* on the
wall mount bracket.
13. Remove protective vinyl sheet from the dome cover once installation is completed.
#LX400020; r.35429/35429; en-US
10