Troubleshooting - Mvision SX-5 USB Manual Del Usuario

TROUBLESHOOTING

If you inquire more specific troubleshooting information, please visit MVISION homepage and
refer to FAQ or Q&A on customer support.
1. If you see nothing on TV screen, or screen trembling.
∙If configuration of video output is set up in wrong way, it might lead nothing on screen or
black and white or screen trembling.
Then Press [TV OUT] button slowly and change video output mode.
2. If MVISION Divx freezes after initial screen appears, and does not proceed to main menu
screen.
∙Check out if USB Device is connected well.
∙Check out if the partition of USB Device is set up and formatted properly.
3. If Subtitle is not showing.
∙ If movie or image file and subtitle file names do not match, subtitle does not shown up. For
example, if the file name of the movie file is " bbb.avi", the file name of subtitle file must be
"bbb.smi".
4. When the power is on, nothing appears on the screen or screen appears in monochrome and
screen is shaking.
∙When video output mode setting is not properly set, screen appears in monochrome or
screen might be shaking.
Press [TV Out] button of the remote control to change output mode until video output mode
setting is properly set.
5. When Video file is not being playing , or nothing appears on the screen (black screen).
∙Video file with unsupported CODEC cannot be played. Users can figure out whether the
CODEC is being supported from the test program or use the media conversion program to
convert the file.
Otherwise, press [TV OUT] button of the remote control, twice.
6. When Screen is being displayed with no sound.
∙Check the external TV's input terminal.
The video input terminals of external equipment such as the composite,
component have separated audio inputs.
Check it the video and sound inputs are properly connected.
42