Installing Equipment - Mvision SX-5 USB Manual Del Usuario

GENERAL INFORMATION
V. REAL PANEL
1. AERIAL
Connects to Terrestrial antenna cable.
2. LOOP OUT
Connects to another STB.
3. LNB IN
Connects to Satellite antenna cable.
4. LNB OUT
Connects to another STB.
5. DIGITAL AUDIO
Output for connecting to a digital amplifier.
6. AUDIO-R
Connects to AUDIO RIGHT to TV or other equipment.
7. VIDEO Connects VIDEO to the TV or other equipment.
8. AUDIO-L
Connects to AUDIO LEFT to TV or other equipment.
9. TV SCART
Connects to TV SCART cable.
10. VCR SCART
Connects to VCR SCART cable.
11. TV/VCR
Connects to TV or VCR.
12. ANT
Connects to TV antenna input.
13. RS 232
Connects to personal computer for software upgrade.
14. ETHERNET
Connects to LAN cable.
15. YUV
Connects to YUV jack of TV or VCR
16. USB Connects to USB device.
17. POWER SUPPLY
90~250V AC, 50/60Hz, 40W.
18. POWER BUTTON
Turns On/Off.
8

INSTALLING EQUIPMENT

This section explains several ways of connecting the receiver to your existing
TV, VCR and Hi-Fi system.
You can choose one of the following setups that we recommend.
If you have any problem or need help, consult your dealer or service provider.
Please ensure that the following items are included with the receiver in your packing.
I. CONNECTING THE RECEIVER TO TV
I-1. Connecting the receiver to TV with the SCART cable
Connect one end of the SCRAT cable to the TV SCRAT cocket on the rear panel of the
receiver and the other end to a SCRAT socket on the TV.
II. CONNECTING THE RECEIVER TO TV WITH CINCH CABLE
II-1.Connecting the receiver to TV with the CINCH cable
Connect one end of the CINCH cable to the Audio-R(Red), the Audio-L(White)and the
Video (Yellow) socket on the rear panel of the receiver and and other end to the Audio-
R(Red), the Audio-L(White) and the VIDEO(Yellow) socket on the TV.
9