AGA marvel AELTTDW Instrucciones De Operacion Y Mantenimiento página 20

Ocultar thumbs Ver también para AELTTDW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Dishes are not clean
Calcium streaks,
misty appearance
Fading of glasses,
china, porcelain pattern
Foam
TROUBLESHOOTING
Possible Cause and/or Remedy
Improper loading:
Load the dishwasher as suggested in this manual.
Wrong program selection:
Select a program that washes at a higher temperature or takes a longer
amount of time.
Spray arms are not turning:
Check if the spray arms are blocked from moving freely.
Clogged filters:
Clean all filters as described in this manual.
Filters are not placed in their proper positions:
Check if all filters are placed in their proper positions.
Spray arm nozzles are clogged:
Clean the spray arms as described in this manual.
Overloaded racks:
Do not overload the racks.
Detergent is moist or clumping in box:
Store detergents in a dry location. Close the lid of the
container securely.
Too little detergent:
Increase the amount of the detergent as per the
program table.
Too little rinse agent:
Increase the amount of rinse agent and/or refill the rinse agent dispenser.
The lid of the detergent dispenser remained open:
Always ensure that you close the detergent dispenser
lid after pouring in the detergent.
Washing cutlery with worn surface quality:
Cutlery of this type is not suited to dishwashers.
Insufficient rinse agent supply:
Increase the dosage amount of rinse agent and/or refill the rinse agent
dispenser.
The hardness is not selected properly; too little salt is being used:
Call water supplier and ask for local hardness in grains per gallon or ppm.
Fading of decoration on glasses and porcelain:
Glasses, porcelain, and cutlery of this type are not suited for the dishwasher.
The dishes are pre-washed by hand with a large amount of dish detergent:
Dishes do not need to be pre-washed. Coarse dirt may be removed with a
dishcloth, or you may hold the dishes under running water.
Rinse agent has accidentally leaked into the machine:
If rinse agent has been spilled during refilling, remove the agent using a
paper cloth or sponge.
The cover of the rinse agent dispenser is not closed securely:
Always take care to ensure that the lid is closed after refilling the rinse
agent dispenser.
20

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

AlttdwAmcttdwAmprottdwHcttdw

Tabla de contenido