Installation Instructions; Features; Operating Instructions - Danby CONTEMPORARY CLASSIC DAR110A2LDB Manual Del Usuario

Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a
wet, lukewarm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or
moisture. Let air circulate freely around the unit. Keep the rear of the refrigerator 5 inches away from the
wall.
Location
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the refrigerator and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
4) Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the evapora-
tor, and your refrigerator will have to be defrosted more frequently.
1) THERMOSTAT DIAL
2) TEMPERED GLASS SHELVES
3) MAGNETIC GASKET: Tight fitting door seal
keeps all the cooling power locked inside. No hooks or
latches.
4) CRISPER WITH TEMPERED GLASS SHELF
5) 2 LITRE AND GALLON BOTTLE STORAGE
The temperature of the refrigerator is controlled by setting the thermostat knob (on
the ceiling of the cabinet) to a desired setting.
To start the refrigerator, turn the temperature control knob to the position corre-
sponding to the desired cooling setting.
The refrigerator temperature will vary depending on the quantity of food stored
and on the frequency with which the door is opened.
To turn the control to the "OFF" position, rotate the control knob to the "OFF"
position. If the refrigerator is not going to be used for long time periods, discon-
nect the plug and leave the door partially open. This will help to prevent
mold/mildew from accumulating inside the refrigerator cabinet.
Changes in ambient room temperature will affect internal refrigerator tempera-
tures, adjust the thermostat knob accordingly. In the OFF position, the appliance
does not operate (cooling system is switched off,) yet the power supply is not
interrupted (the light is on when you open the refrigerator door.) Temperature in
the refrigerator is dependent on how often the door is opened.
INSTALLATION INSTRUCTIONS

FEATURES

OPERATING INSTRUCTIONS
3