Kit Description; Parts Description; Installation; Installation Reccomendations - Carrier 80AW9019 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22

Kit description

Parts description

Actuator
See fi g. 3
1.
Actuator
2.
Knob
3.
Indicators
4.
Screw
5.
Adaptor
3 Way Valve
See fi g. 4

Installation

Installation recommendations
Please refer to the Safety information manual and to the
Hydronic Module manual.
These devices are intended to be installed on 80AW2---
hydronic modules.

Installation schemes

The 80AW2--- hydronic module is designed to be connected
with up to 2 zone kits.
See fi g. 6
1, 2 – left connections
3, 4 – right connections
The connection possibilities are the following
Confi guration
1
Zone 1 kit
3W
Zone 2 kit
-
The zone kits are designed to be connected either left or
right connections.
In order to do that, the kits can be mounted in two diff erent
ways.
See fi g. 7
A - Schematics of Zone kit with 3 way valve to be connected
on left connections
B - Schematics of Zone kit with 3 way valve to be connected
on right connections
C - Schematics of Direct zone kit to be connected on left
connections
D - Schematics of Direct zone kit to be connected on right
connections
128H72_GB.indd Sez1:7
128H72_GB.indd Sez1:7
2
3
4
5
6
D
3W
3W
D
D
-
3W
D
3W
D
Room temperature sensor for zone 2
See fi g. 5
1.
Sensing element
2.
Holes for wall installation
3.
Terminals for cable connection
1,2,3,4 - Connections to the hydronic module
5 - 3 way valve + actuator
6 - Water pump
7 - Water temperature sensor
8 - Floor heating manual reset protection
A physical example of the possibility to mount the kits in 2
diff erent ways is given in fi g. 8.
A - Zone kit with 3way valve mounted to be connected to
left connections
B - Zone kit with 3way valve mounted to be connected to
right connections
C - Direct zone kit mounted to be connected to left
connections
D - Direct zone kit mounted to be connected to right
connections
In fi g. 7 and fi g. 8, connections 1,2,3,4 are intended to be
connected to the ones with the corresponding number on
the hydronic module in fi g. 6.
80AW9019 - 9020
7
1-01-1970 3:01:55
1-01-1970 3:01:55

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

80aw9020

Tabla de contenido