Furrion Aurora FDUP43CBR Manual De Instrucciones página 22

TV Settings
Press
sub-menu, then
press
select Off /On for
HDMI CEC
HDMI CEC.
When selecting On,
the sub-menu in the
right column will be
available to set up.
Select the EDID
EDID Switch
version.
Restore Reset to factory
Default default settings.
NOTE: HDMI CEC function is only available when connecting with a CEC device.
22
Setup Menu
Auto Standby
to enter
Auto TV on
or to
HDMI ARC
Device control
Device list
Press or
Press or
Press or to select Off /On.
In On mode, TV will shut down when there is no signal for
several minutes.
Press or to select Off /On.
In On mode, TV will automatically turn on when the
connected CEC device is turned on.
Press or to select Off /On.
Set the HDMI ARC On if you want to enable the ARC
function with a connected 5.1/7.1 Home Theater System.
Press or to select Off /On.
In On mode, it allows a connected CEC device to be
controlled by TV remote control.
Press to display a list of HDMI CEC devices currently
connected to the TV.
to select Auto, EDID 1.4 or EDID 2.0.
to select Yes or No.