Picture Settings; Picture Menu - Furrion Aurora FDUP43CBR Manual De Instrucciones

TV Settings

Picture Settings

1. Press MENU button, the setup window will appear on the screen.
2. Use or to highlight Picture mode.
3. Use or to highlight the item you would like to reset, then press
settings.
4. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
Picture
Select the display mode
Mode
Contrast Control the contrast level of the picture
Control the brightness level of the
Brightness
picture
Color
Control the color level of the picture
Tint Control picture tint
Sharpness
Control the sharpness of the picture
Color Temp Select the color mode
If this is set as On, the screen changes
Blue Screen
to blue when no signal input.
Advanced
Press
Setting
features in right column.

Picture Menu

to enter sub-menu to set the
to select User / Standard / Dynamic / Mild.
Press or
Press or to increase or decrease contrast intensity.
* Only adjustable after set "Picture Mode" as "User" mode
Press or to increase or decrease the overall brightness.
* Only adjustable after set "Picture Mode" as "User" mode
Press or to increase or decrease the color intensity.
* Only adjustable after set "Picture Mode" as "User" mode
Press or to adjust colors toward green or reddish tint.
* Only adjustable under NTSC signal
Press or to soften or enhance edges in the picture.
* Only adjustable after set "Picture Mode" as "User" mode
Press or to select Medium / Warm / Cool.
Press or to set as On or Off.
Press
Aspect Ratio
Normal/Cinema/ Zoom.
Press
Noise Reduction
Weak / Middle / Strong.
Dynamic Contrast
Press
HDMI mode
Press
Auto Brightness
Press
or to select the
or to select Wide /
or to select Off /
or to set as On or Off.
or to set as Video.
to set as On or Off.
or
23