Tabla de contenido
Publicidad
Enlaces rápidos
Installation Instructions
Trektop PRO Twill
Installation Tips
Before you begin installing your new Trektop PRO Twill, please
read all the instructions thoroughly.
For a smooth fit:
For easier installation, the top should be installed at a temperature above
72º F. Below this temperature, the fabric may contract an inch or more,
making it difficult to fit the vehicle.
It is normal for the fabric to contract and wrinkle when stored in the ship-
ping carton. Within a few days after installation, the fabric will relax and the
wrinkles will disappear.
See pages 40 – 42 for instructions to install and connect rear
window wipers or defrosters.
Safety glasses should be worn at all
times when installing this product.
Tools
Phillips
Utility Knife
Screwdriver
4mm Allen
10mm & 13mm
Wrench
Wrench
This product is designed primarily to enhance the appearance of the vehicle and to shield the occupants from ordinary weather conditions. Do not rely in
any way on the components of this product to contain the occupants within the vehicle, or to protect against injury or death in the event of an accident, This product will not protect
the occupants from falling objects. Never operate the vehicle in excess of manufacturer's specifications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions provided when installing this product. Failure to do so may result in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
P1 - 54853 - Rev. B 0215
Ratchet
13mm Socket
Safety
Glasses
Installation Instructions - Trektop PRO Twill
Installation Time
4 Hours
Skill Level
3 - Moderately Difficult
Vehicle Application:
Jeep Wrangler Unlimited (JK) 4 Door
2007 – Current
Part Number: 54853
Support
We're here to help!
Go to www.Bestop.com and
click "Contact Us"
See a video showing
installation of this top at
www.bestop.com/video
© 2014 Bestop, Inc.
Publicidad
Tabla de contenido
Manuales relacionados para Bestop Trektop PRO Twill
Resumen de contenidos para Bestop Trektop PRO Twill
- Página 1 2007 – Current Trektop PRO Twill Part Number: 54853 Installation Tips Before you begin installing your new Trektop PRO Twill, please read all the instructions thoroughly. For a smooth fit: For easier installation, the top should be installed at a temperature above 72º...
- Página 2 Vehicle Application: Jeep Wrangler Unlimited (JK) 4 Door Installation Instructions 2007 – Current Trektop PRO Twill Part Number: 54853 Installation Instructions - Trektop PRO Twill P2 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
-
Página 3: Parts List
Qty - 2 Qty - 1 Qty - 1 Part # 510.55 Part # 510.56 Part # 509.74 Part # 510.95 Part # 510.96 Installation Instructions - Trektop PRO Twill P3 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 4: Tabla De Contenido
Part # 479.87 - Left Part # 479.86 - Right Part # 480.22 Part # 485.51 - Left Part # 485.50 - Right Installation Instructions - Trektop PRO Twill P4 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. - Página 5 Qty - 2 Qty - 1 Qty - 1 Part # 514.04 Part # 514.05 Part # 510.16 Part # 510.17 Part # 511.87 Installation Instructions - Trektop PRO Twill P5 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 6 Qty - 2 Qty - 1 per side Qty - 1 Part # 417.43 Part # 457.76 (R) & 457.77 (L) Part # 510.18 Installation Instructions - Trektop PRO Twill P6 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 7 Step 1 Install the Cable Bracket on the Window Carrier in the hole closest to the front (the side with the molded cap). Installation Instructions - Trektop PRO Twill P7 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 8 Installation Instructions - Trektop PRO Twill P8 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 9 Rear Bracket to the sport bar through the holes cut in the sport bar cover. Repeat on both sides of the vehicle. Installation Instructions - Trektop PRO Twill P9 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
-
Página 10: M8 X 75Mm Knob
Repeat on the other side of the vehicle. of the Rear Door Surround around the horizontal sport bar. Repeat on the other side of the vehicle. Installation Instructions - Trektop PRO Twill P10 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 11: Front Door Surround
Door Surround. with the rear. Repeat on the other side of the vehicle. Installation Instructions - Trektop PRO Twill P11 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 12: Qty
Secure it with the M8 x 30mm Knob. Repeat the Front and Rear Door Surrounds join. with the Right Sunrider Bracket. Repeat on both sides. Installation Instructions - Trektop PRO Twill P12 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. - Página 13 Qty - 4 Part # 512.93 M6 Nylock Nut Qty - 4 Part # 494.01 Step 1 Install the Window Carrier to the Rear Bracket. Installation Instructions - Trektop PRO Twill P13 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
-
Página 14: Qty
Qty - 4 Part # 512.93 M6 Nylock Nut Qty - 4 Part # 494.01 Step 1 Install the Halo Frame to the Window Carrier. Installation Instructions - Trektop PRO Twill P14 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 15: Halo Center
Install Halo Hardware Step 1 509.80 Halo Center Qty - 1 Part # 509.80 Step 1 Position the Halo Center on the Halo Frame. Installation Instructions - Trektop PRO Twill P15 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. - Página 16 Part # 431.62 Part # 494.01 M6 Washer Qty - 4 Part # 257.93 Step 1 Install the R/L Halo to the Window Carrier. Installation Instructions - Trektop PRO Twill P16 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 17 Step 2 Hook the Strut Bracket under the belt Secure bracket to Halo and belt rail. rail inside the vehicle and rotate up. Installation Instructions - Trektop PRO Twill P17 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 18 Use M8 x 20 Screws, M8 Washers and M8 x 20 Locknuts to secure Halo to belt rail on each side of the vehicle. Installation Instructions - Trektop PRO Twill P18 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
-
Página 19: Halo Seal (Long)
Part # 510.17 Step 1 Install the Halo Seal on the Halo. Start at the bottom on each side and work toward the center. Installation Instructions - Trektop PRO Twill P19 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 20: Importante
Un serrage trop important peut craqueler With at least 2 people, install the Rear ou casser la lunette en verre. Window Glass on the Halo. Installation Instructions - Trektop PRO Twill P20 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. - Página 21 (tube section) of the Strut to the Rear Window Glass. Then mount the rod at the bottom to the Strut Bracket. Repeat with both Struts. Installation Instructions - Trektop PRO Twill P21 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
-
Página 22: Rear Seal (Short)
Step 1 Install the Rear Seal on the bottom of the Rear Window Glass. Start on the outside edges and work toward the center. Installation Instructions - Trektop PRO Twill P22 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 23: Upper Tg Panel Seal
Install the TG Panel Seals on the tailgate panel. The Upper TG Seal aligns with the top and the Lower TG Seal aligns with the Upper TG Seal. Installation Instructions - Trektop PRO Twill P23 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. -
Página 24: Qty
Front Door Surrounds. Push the other end inward to flex the bow and insert it into the slot on the other side of the vehicle. Installation Instructions - Trektop PRO Twill P24 - 54853 - Rev. B 0215 © 2014 Bestop, Inc. - Página 25 Rear Door Surrounds. Push the other end inward to flex the bow and insert it into the slot on the other side of the vehicle. Installation Instructions - Trektop PRO Twill P25 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 26 Window Carriers. It will be necessary to flex the for a tight and secure fit of the Halo and bow to insert it in the mounts. Arch Bows. Installation Instructions - Trektop PRO Twill P26 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 27 Insert Side Bows into Header Assembly on set aside to be reused. each side. Pivot quick release knobs to face toward inside of assembly. Installation Instructions - Trektop PRO Twill P27 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 28 Use #8 x 1/2" Screws to mount a Side Bow to Rotate the Header Assembly and insert #8 x each side of the Header Assembly. 1/2" Screws on each side. Installation Instructions - Trektop PRO Twill P28 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 29 Attach Side Bows to Header/Fabric Assembly (cont.) Step 5 Step 5 Rotate the Header Assembly back into position and reinstall the screws removed in Step 1. Installation Instructions - Trektop PRO Twill P29 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 30 Header. Header. Repeat on the driver side. Installation Instructions - Trektop PRO Twill P30 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 31 Side Sunrider Bracket. Repeat on the other side Bows on top of the Door Surrounds. of the vehicle. Installation Instructions - Trektop PRO Twill P31 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 32 Step 1 Run the cable under the Door Surround screw and hook into the Cable Bracket on the Window Carrier. Repeat on opposite side. Installation Instructions - Trektop PRO Twill P32 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 33 Roll the window retainer into the slot at the and slide the tube on the top of the Side front of the Door Surround. Window into the slot in the carrier. Installation Instructions - Trektop PRO Twill P33 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 34 Start at the front and work from front Install the rear corner retainer. to back to install the retainer along the bottom of the window Installation Instructions - Trektop PRO Twill P34 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 35 Step 5 Start at the bottom and roll the retainer into the slot in the Rear Halo. Work up from bottom to top. Installation Instructions - Trektop PRO Twill P35 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 36 Rear Halo above the Rear Carrier. Window hinges. Operation is made easier if the top is in Sunrider mode for both installation and removal of soft goods. Installation Instructions - Trektop PRO Twill P36 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 37 Section 24 Page 37 Install Top Fabric Step 3 Step 3 Engage rear hook and loop. Installation Instructions - Trektop PRO Twill P37 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 38 Step 2 Close Sunrider Hook the latches on the Header into the loops in the windshield. Do not close latch. Repeat on opposite side. Installation Instructions - Trektop PRO Twill P38 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 39 Page 39 Close Top Step 3 Step 3 Hook the latches on the Header into the loops in the windshield and close them. Installation Instructions - Trektop PRO Twill P39 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 40 Included) and install according to MOPAR directions. Model Years 2007 2010 82210215 Model Years 2011+ without heated mirror 82212859 with heated mirror 82212860 Installation Instructions - Trektop PRO Twill P40 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 41 You will need to reuse the original washer screws provided in the harness kit to route fluid connector for the Trektop PRO the wires. washer fluid tube. Installation Instructions - Trektop PRO Twill P41 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 42 Options Page 42 Available Accessories 5485801 Rear Wiper Motor Kit 5485701 Heater Grid Only Harness Installation Instructions - Trektop PRO Twill P42 - 54853 - Rev. B 0215 © 2014 Bestop, Inc.
- Página 43 This warranty is not transferable. What Bestop will do: During the warranty period as written above, Bestop shall, at its option, either repair or replace any defective product at no charge. Bestop will not pay for labor charges associated with installation or removal of the product.
- Página 44 ¿Qué cubre esta garantía? Todos los defectos en materiales y mano de obra de los productos de tela asargada Bestop. Esta garantía no aplica a otros productos de Bestop. Esta garantía y todas las garantías implícitas, incluidas las de comerciabilidad e idoneidad para un fin determinado, estarán vigentes vdurante todo el tiempo que el comprador original del producto siga siendo dueño del vehículo en el cual está...
-
Página 45: Installation Instructions
Cleaner (pièce no 11201-00) et Bestop Twill Protectant (pièce no 11207-00) which qui sont spécialement formulés pour fournir un système complet de nettoyage et de protection. Vitres : Maintenir les vitres propres pour éviter de les égratigner. NE PAS utiliser une brosse sur les fenêtres. Laver avec un chiffon ou une éponge imbibée d’eau et d’un savon à vaisselle doux. Bestop recom- mande Bestop Vinyl Window Cleaner (no de pièce 11203-00), lequel nettoie et protégé...