Tabla de contenido
Publicidad
Section 1
Install Rear Brackets
Step 1
510.96
510.95
13mm Wrench
Step 1
Unzip the upper rear and rear leg sport bar covers
and locate the upper sport bar bolt. Use a 13mm
socket and ratchet to remove the bolt and set it
aside to be reused.
P8 - 54853 - Rev. B 0215
Installation Instructions - Trektop PRO Twill
Step 2
Step 2
Cut two horizontal slit the same width as the
Cable Bracket in the sport bar cover 1/4"
below the zipper and aligned with the bolt
hole.
Page 8
Utility Knife
© 2014 Bestop, Inc.
Publicidad
Tabla de contenido
