Proper Use; Technical Data - Robust 1100/1 Manual De Instrucciones Original

Anleitung_RB_PO_1100_1_SPK7__ 23.07.14 15:36 Seite 17
8. Sanding attachment K = 80 (2 pcs)
9. Sanding attachment K = 120 (2 pcs)
10. Allen key 8 mm
11. Allen screw M 10 x 20 mm (2 pcs)
Original operating instructions
n
Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
3. Layout (Fig. 2/3)
1. Spindle lock
2. Front handle
3. ON/OFF switch
4. Speed control
5. Rear handle
6. Power cable
7. Polishing / sanding disk
8. Speed indicator

4. Proper use

The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
Contact with the unguarded wheel (injuries
n
through cutting)
Reaching into the wheel while it is still rotating
n
(injuries through cutting)
Catapulting of parts of the wheel (injuries through
n
cutting or bruising)
Catapulting of parts of the material being
n
processed (injuries through cutting or bruising)
Risk of fire from flying sparks
n
Damage to hearing if the compulsory hearing
n
protection is not used (hearing loss)
Inhalation of abrasive particles from the material
n
and wheel
Electric shock upon contact with non-insulated
n
electrical parts
If the instructions listed in the operating instructions
are not adhered to, improper handling of the
equipment may result in other residual risks

5. Technical data

Voltage:
Power rating:
Speed:
Polishing / sanding disk diameter:
Connection thread:
Totally insulated
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745-2-3.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745-2-3.
GB
230V ~ 50 Hz
1100 W
1000-3500 min -1
180 mm
M14
II/
2.2 kg
86 dB(A)
3 dB
97 dB(A)
3 dB
17