English
Welcome
Thank you for purchasing the Furrion Universal Outdoor Full Motion Mount for 43"/49"/55"/
65" Furrion Aurora™ TV. Before operating your new product, please read these instructions
carefully. This instruction manual contains information for safe use, installation, introduction of
the product. Please keep this manual for future reference.
The manufacturer does not accept responsibility for any damages from incorrect installation
due to not observing these instructions.
If you have any further questions regarding our products, please contact us at
support@furrion.com
Important Safety Instruction
WARNING
This product is designed to be installed on wood stud or solid concrete walls. Before
installing make sure the wall or mounting surface will safely support four times the
combined weight of the mounted equipment, including its accessories. Never exceed
the Maximum Load Capacity (132 lbs/60 kg).
PLEASE NOTE: Improper installation will void warranty and may cause serious injury or
damage. It is recommended that a qualified contractor installs the full motion mount.
Safety Precaution
1. Ensure these instructions are thoroughly understood before attempting installation.
If unsure of any part of the installation process, contact a professional installer for
assistance.
2. Be careful not to pinch fingers during installation.
3. At least two people are required for this installation and it is highly recommended that this
product is installed by qualified professionals.
4. Screws must be tightly secured, but do not overtighten screws. Over tightening can damage
the items, greatly reducing their holding power.
5. Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
6. Safety gear and proper tools must be used. Failure to do so can result in property damage
and/or serious injury.
7. This wall mount is intended for use only with the maximum weight of 132 lbs (60 kg). Use
with products heavier than the maximum weight indicated may result in instability causing
possible injury.
8. Care and clean: Clean your mount regularly with a dry cloth. Inspect all screws and hardware
periodically, including tilt/level adjustment screws, to ensure that no connections become
loose over time. Re-tighten as needed.
3