Furrion F2AA001ABBK Manual De Instrucciones página 9

Installation
Step 2 -
Attach TV Bracket to
TV Display
1. Determine the correct length and
diameter of screws based on your TV hole
patterns.
● If your TV back is flat, use the shorter
screws with washers.
● If your TV back is irregular or curved,
use the longer screws with washers and
spacers (L).
* For Furrion Aurora™ TV, please use the
screw size M6 *15 (D) and washers (G) to
attach the TV bracket to TV back.
(D)
2. Assemble the configured TV bracket on
the back of Furrion Aurora™ TV by using
4 x M6*15 screws (D)and washers (G).
Ensure the bracket is vertically centered
and level. Tighten the screws (D) to
ensure the TV bracket securely attached
on TV back.
Warning: Make sure to use the correct
length screw for your TV. A screw that is
too long might damage your TV.
Step 3 -
Plate
Caution: Please use at least two people to
move and install the TV on the wall plate.
1. Hang the TV onto the arm of wall plate
(G)
2. Rotate the two knobs on the bottom of
Hang TV on the Wall
by hooking the top support firstly, then
resting the TV into place.
NOTE: A fixing strap is suggested to
apply to prevent the moving of the
arm while attaching an TV in windy
environment.
arm mount clockwise to fix the TV onto
wall plate securely.
9