COMO AUDIO The Turntable Manual De Usuario página 7

Replacing the stylus
EN
A damaged or worn stylus may damage your records and should be replaced. The stylus is changed
by pulling it straight out and in the opposite direction of the turntable's arm: with one hand, grasp
the stylus from both sides and pull. Installing the new stylus: Holding the new stylus from the top,
press it gently into the space at the tip of the cartridge where the old stylus was. Don't force it. If
you wish to replace the entire cartridge we strongly recommend using a local professional service
center of your choice, as the tonearm wires connecting to the cartridge are very delicate and can
break very easily. The included allen wrench can be used to remove the cartridge from the
headshell.
Placement, cleaning, and other suggestions
Place the Como Audio Turntable on a level, flat surface not subject to vibration.
Wipe the dust cover and plinth as needed with a soft cloth.
We recommend you keep the dust cover closed during playback to protect the record and
stylus.
We further recommend you keep the tone arm locked to the tone arm rest when not in use to
prevent the arm from accidentally moving and damaging the stylus.
Keep your records away from heat to avoid warping and store them in their respective sleeves
to help protect them.
Do not attach a cleaning brush to the tone arm, as this will change the weight the
counterweight has been pre-set for.
We do not recommend the use of a record weight stabilizer, as it puts additional strain on the
motor.
___________________________________________________________________________
7