General Guidelines - DELTACALOR FLY SOUFFLERIE Manual De Usuario Y De Instalación

Synoptic
ON/STANDBY button
Programme indicator and
towel warmer heating LED
Endurance indicator LED
General guide lines
ON/OFF LED (A):
• Remains off when there is no power supply.
• The LED is green when the power is on.
• It is orange when the resistance is not active.
• It is red when the resistance is on.
• It is violet when the "Dryer C" mode is acti-
vated.
BOOST LED (B) steady red until the device is en-
abled in BOOST mode.
DRYER LED (C) steady red until the device is en-
abled in DRYER mode.
The fan will be enabled at reduced speed for one minute at the end of the BOOST and DRYER
modes to allow device to cool down properly.
NOTE - When turned on, device fan and internal resistance are enabled at the same time. Wait a few
seconds to feel the hot air from the front grid.
OPERATION
IR
2h 60
30
15
[ 38 - EN ]
BOOST button (BOOST
+ MORNING, EVENING
programming)
(over temperature cancelled
BOOST LED
Keyboard lock
DRYER LED
DRYER button ( DRYER +
keyboard lock)
A
2h 60
30
15
and reset)
B
C