DELTACALOR FLY SOUFFLERIE Manual De Usuario Y De Instalación página 44

Flashing LED red / green alternately
+ BOOST/DRYER led alternately
=> temperature error
Having cleaned the filter or eliminated what-
ever is obstructing the intake of air, the user
must hold the BOOST and DRYER keys
down simultaneously for 5 sec.
If the temperature goes too high, the device
resistance is turned off and the fan runs at
reduced speed for the next minute.
To send commands from the remote control to the fan, point the remote control at the IR sensor.
Reception of the command is confirmed by LED A flashing blue 5 times, and an acoustic signal is
emitted.
Internal overheating.
Thermo mechanical security on device internal
resistance enabled.
If the dust filter is clogged see p.45 for filter
cleaning.
Green
The user can intervene to solve the problem.
IR SENSOR
IR
2h 60
30
15
[ 44 - EN ]
Red
5 sec