Paradox Grafica DNE-K07 Manual De Referencia E Instalación página 10

Option [7] OFF = Temperature sensor input (default)
Option [7] ON = Zone input
5.8 Keypad Tamper
S [002]: O
ECTION
When the keypad tamper option is enabled and the keypad's anti-tamper
switch (optional) is triggered, the keypad will send a Tamper report to the
control panel via the combus.
Option [8] OFF = Grafica's tamper option is disabled (default)
Option [8] ON = Grafica's tamper option is enabled
5.9 Beep on Trouble
S [003]: O
ECTION
Potential troubles have been sorted into groups. With these options enabled,
the keypad will emit an intermittent beep tone whenever a trouble condition
occurs from one of the trouble groups. The intermittent beep will remain
activated until the user enters Grafica's Trouble Display or if the trouble is
resolved. For a list of troubles, see the appropriate control panel's Reference
and Installation Manual. The intermittent beep will be re-initialized whenever
the trouble condition reoccurs.
5.9.1 System and Clock Trouble Beep
S [003]: O
ECTION
Option [1] OFF = Beep disabled (default)
Option [1] ON= Beep on: System Troubles and Clock Loss
5.9.2 Communicator Trouble Beep
S [003]: O
ECTION
Option [2] OFF = Beep disabled (default)
Option [2] ON = Beep on: Communicator Troubles
5.9.3 Module and Combus Trouble Beep
S [003]: O
ECTION
Option [3] OFF = Beep disabled (default)
Option [3] ON = Beep on: Module and Combus Troubles
5.9.4 All Zone Trouble Beep
S [003]: O
ECTION
Option [4] OFF = Beep disabled (default)
Option [4] ON = Beep on: All Zone Troubles
8 Reference & Installation Manual
[8]
PTION
[1] [4]
PTIONS TO
[1]
PTION
[2]
PTION
[3]
PTION
[4]
PTION