Braun Multiquick professional MR 5550 M BC-HC Manual De Instrucciones página 6

Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.
Caution
Please read the use instructions carefully and
completely before using the appliance.
• The blades are very sharp!
• Always unplug the appliance before assembling,
disassembling, cleaning or storing.
• The appliance must be kept out of reach of
children.
• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any
way.
• Do not hold the motor part
under running water, nor immerse them in
I
water.
• Braun electric appliances meet applicable safety
standards. Repairs or the replacement of the cord
must only be done by authorized service person-
nel. Faulty, unqualified repair work may cause
considerable hazards to the user.
• Before plugging into a socket, check that your
voltage corresponds to the voltage printed on the
bottom of the appliance.
• The appliance is constructed to process normal
household quantities.
• Be advised that the maximum rating of this ap-
pliance is based on the «HC» chopper attachment
which draws the greatest power consumption.
The other recommended attachments may draw
significantly less power.
• Neither the beaker
is microwave-proof.
Description
Motor part
A
On/off switch for variable speed
B
On/off switch for turbo speed
C
Quick-release knobs
D
Variable speed regulator
E
Blender shaft
F
Wall mount
G
Measuring beaker with airtight lid
H
Whisk gear box
I
Whisk
J
«HC» chopper
K
«BC» chopper
L
Ice crushing insert for «BC» chopper
M
Setting the speed
When activating the on/off switch
speed corresponds to the setting of the variable
speed regulator . The higher the setting, the faster
E
the chopping results.
However, maximum processing speed can only be
achieved by pressing the turbo switch
also use the turbo switch for instant powerful pulses
without having to adjust the variable speed regulator.
Depending on the application, we recommend the
following speed settings:
Handblender 1...turbo
Chopper 1...turbo
Whisk 4...8
How to operate your handblender
The handblender is perfectly suited for preparing
dips, sauces, soups, mayonnaise and baby food as
well as for mixing drinks and milk shakes.
1. Insert the motor part
until it locks into place.
or the whisk gear box
A
, nor the chopper bowl/jug (c)
H
, the processing
B
. You may
C
into the blender shaft
A
2. Position the handblender deep in the container
being used to prepare your food or drink, then
press the on/off switch
switch to begin.
C
3. To release the blender shaft after use, press the
release knobs
You can operate the handblender in the measuring
beaker , or in any other container. When blending
H
directly in the saucepan while cooking, remove the
pan from the burner first to protect your handblender
from overheating.
How to operate your whisk
Use the whisk only for whipping cream, beating egg
whites and mixing instant puddings.
1. Insert the whisk
insert the motor part
locks into place.
2. Place the whisk in a bowl before pressing the on/
off switch
3. To release the whisk, press the release knobs
and pull off the gear box. Then pull the whisk out
of the gear box.
For best results:
• Use a wide container.
• Only whip up to 400 ml (14 oz) chilled cream at one
time.
• Only whip up to 4 egg whites at one time.
• Move the whisk clockwise when mixing
ingredients.
How to operate your chopper
attachment/s
(see page 4)
«BC» chopper
(a) Chopper gear box
(b) Blade
(c) Jug
(d) Anti-slip base/lid
(e) Ice blade
(f) Ice crushing insert
Both the «HC» and the «BC» choppers are perfectly
suited for chopping meat, cheese, onions, herbs,
garlic, carrots, nuts etc.
When chopping hard foods (e.g. parmesan cheese,
chocolate) use the turbo switch
N.B.:
Do not chop extremely hard food, such as nutmeg or
coffee beans in either chopper.
Use the «HC» chopper for smaller quantities.
It is especially suited for chopping herbs and chiles
(with water).
Use the «BC» chopper for larger quantities and for
hard foods like parmesan cheese or chocolate.
The «BC» chopper is perfect for a variety of other
applications like crushing ice, mixing frozen drinks
and milk shakes, pureeing soups and preparing
batters.
Before chopping ...
• cut meat, cheese, onions, garlic, carrots, chiles
into small pieces (see processing guide on page 5).
• remove stems from herbs, shell nuts.
• remove bones and gristle from meat.
For best results, please refer to the speed settings
recommended in the processing guide on page 5.
Chopping
(see picture section A on page 4)
1. Carefully remove the plastic cover from the blade
(b). Caution: the blade is very sharp! Always hold
it by the upper plastic part.
2. Press the blade on the center pin of the chopper
bowl (c) until it locks into place. For the «HC»
F
chopper: press straight down the blade and turn
or the on/off turbo
B
and pull it off.
D
into the whisk gear box
J
into the gear box until it
A
to turn on the whisk.
B
«HC» chopper
(a) Chopper gear box
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid
.
C
, then
I
D
7