Eco Mode - DELTACALOR DROP Manual De Usuario Y De Instalación

6. COMFORT-2: the ambient temperature
is kept 2°C lower than the COMFORT
temperature.
How is PILOT WIRE mode activated?
• Press the MODE key and select the
Fil-Pilote mode, the relative icon will
show on the display.
• Set the desired temperature through the
and keys.
Functions
Lock keys using the remote
control
This function allows the user blocking the
keypad so to avoid inadvertent changes. To
enable the Key-lock function, press simulta-
neously the keys MODE and
onds. To disable the function, repeat the same
procedure.

ECO mode

The ECO function can be used to reduce the
electric consumption when the room is not
occupied for a certain period.
• To enable the function, press the dedicated
key. Every temperature previous-
ly set is lowered by 3°C. The
shown on the display.
• To disable this function, press again the
key.
• Key and key
mode on for both.
• Key with blue light flashing and key
with blue light on: mode that indicates 1°C
less than the temperature set.
• Key and key
mode on standby for both.
for 3 sec-
icon is
with blue light on:
with blue light flashing:
[ 33 - EN ]
ASC function
The ASC function works in CHRONO mode.
It brings the switch on time planned forward
slightly, to increase comfort, while at the same
time reducing overall energy consumption.
This innovative function is particularly useful
if reaching the set temperature in time is im-
portant, such as in bathrooms in the morning
when you wake up for example.
To enable the ASC function press the
MODE key until the
on the display.
• Press simultaneously the keys
for at least three seconds.
• To disable this function, repeat the proce-
dure.
NOTE - This function is not available on every
thermostat model; please refer to the user manu-
al for a precise description of the function.
NOTE - This function is only available in the
Crono mode.
Open Window Detection function
The open window detection function allows
the unit to detect when windows are opened
in the room, in which case it switches off the
heating element for 30 minutes. This function
will be activated if an unexpected drop in
temperature of at least 1,5°C is detected. The
function is deactivated if an increase in tem-
perature of at least 1,5°C is detected, and the
heating starts up again normally. After being in
this mode for 30 minutes, the unit returns to
the operating mode set previously.
• To enable the Open Window Detection
function, press simultaneously the keys
and for at least three seconds.
• To disable this function, repeat the proce-
dure.
Crono icon is shown
and