DELTACALOR DROP Manual De Usuario Y De Instalación página 35

BLOWER function
The blower function is switched on by pushing the
the BLOWER button is pushed once, the blower runs for 2 hours and then switches off. If the
ambient temperature goes above 27°C, the towel warmer goes into stand-by mode, and stays
there until the ambient temperature drops below 27°C or until 2 hours have passed.
LED status
Off
Blue, steady
Blue, flashing
TOWEL WARMER function
The Towel warmer function is switched on by pushing the
image above). If the
hours and then switches off. If the ambient temperature goes above 32°C, the towel warmer goes
into stand-by mode, and stays there until the ambient temperature drops below 32°C or until 2
hours have passed.
LED status
Off
Blue, steady
Blue, flashing
Description
The blower does not run.
Timer controlled operation for 2 hours. The blower goes
into stand-by mode when the present temperature is reached,
that is 27°C.
Blower in stand-by mode.
TOWEL WARMER button is pushed once, the towel warmer runs for 2
Description
The towel warmer is off.
Timer controlled operation for 2 hours.
Heating coil on stand-by.
[ 35 - EN ]
BLOWER button (see image above). If
TOWEL WARMER button (see