Blaupunkt VIO-HP20 Guia De Inicio Rapido página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. Installation
Check your WiFi signal strength and make sure that the WiFi signal is strong at
the location of your camera. For best performance, the smartphone needs to be
connected to a WiFi network.
5.1. Micro SD installation (optional)
Pull the camera lens up and locate the Micro SD-Card compartment (refer to
Step 1:
chapter 2 point
Step 2:
Install the Micro SD-Card into the indicated MicroSD-card slot.
NOTE: The Micro SD-Card is mandatory for local recording. Please make sure
the Micro SD-Card is CLASS10 rated. Supported are Micro SD-Cards from 8GB
to 256GB.
5.2. Installation
Step 1:
Stick the mounting map
sticker on the wall or ceiling, then use it
as a template to mark the three drilling
points.
Step 2:
Drill through the marked
points and install the plastic anchors on
the three holes.
10
4
)
Step 3:
on the ceiling and drive the screws into
the plastic anchors until they are flush
with the mounting bracket and the
bracket is flat against the wall.
Step 4:
mounting bracket and turn it clockwise
to lock it.
1
Mounting Surface
2
Positioning Map
3
Plastic Anchors
4
Mounting Plate
5
Screw
6
Camera
Place the mounting bracket
Install the camera on the

Publicidad

Tabla de contenido
loading

Tabla de contenido