Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LYRIC INSTALLATION
Mount Wall Cover to a Horizontal 2 in. X 4 in. Electrical Box (See Fig 4)
1. Position the bracket on the electrical box with the arrow pointing up. Insert two #6-32 X 5/8" flat head screws.
Level the bracket and tighten the flat head screws.
2. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.
3. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the bracket.
4. Insert two #6-32 X 3/8" pan head screws. Check leveling, if desired, and tighten the pan head screws.
Fig. 4. Mount bracket, wall cover, wall plate and thermostat to a horizontal 2 in. X 4 in. electrical box.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
ELECTRICAL
BRACKET
BOX
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
WIRE
® U.S. Registered Trademark
© 2015 Honeywell International Inc.
33-00069EFS—01
Printed in United States
WALL
COVER
MOUNTING HOLES (2)
WIRE HOLE
L
K
C
G
AUX
W
Y
2
a
O/B
W
Y
Universal
U
R
1
Hum
Dehum
U
R
2
Vent
C
1 Wire
2 Wire
M.S. 02-15
MOUNTING POSTS (4)
WALL PLATE
MOUNTING HOLES (2)
WIRE HOLE
#6-32 X 3/8" PAN
HEAD SCREWS (2)
THERMOSTAT
M35409
Publicidad
Tabla de contenido
