Safety Devices; Instructions For Installation; Reminders For The Installer; Reference Standards And Laws - Virtus 70/40 FTG Serie Instalación, Uso, Mantenimiento

materials. The plastic recyclable components are:
- the transparent cover, the bags containing the
instructions manual and nozzles (made of
Polyethylene - PE).
- the straps (in Polypropylene - PP).
- APPLIANCE
- The appliance is manufactured 90% from
recyclable metals (stainless steel, aluminium sheet,
copper.. .. ).
- The appliance must be scrapped in compliance
with current regulations governing such disposal.
- Make the appliance unusable before scrapping.
It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-
OUT WASTE CONTAINER ON THE UNIT
OR PACKAGE INDICATES THAT, AT THE
END OF ITS LIFE CYCLE, THE PRODUCT
MUST BE COLLECTED SEPARATE FROM
OTHER WASTE.
SEPARATE COLLECTION OF THIS UNIT AT THE END
OF ITS LIFE CYCLE IS MANAGED BY THE
MANUFACTURER.
THE USER WHO INTENDS TO GET RID OF THIS
EQUIPMENT SHALL CONTACT THE PRODUCER AND
FOLLOW THE SYSTEM THAT THE LATTER HAS USED
IN ORDER TO COLLECT
SEPARATELY AT THE END OF ITS LIFE.
PROPER SEPARATE COLLECTION HELPS PREVENT
POSSIBLE NEGATIVE
ENVIRONMENT AND HEALTH, AND FAVOURS THE
REUSE AND/OR RECYCLING OF THE UNIT'S
MATERIALS.
THE UNAUTHORISED DISPOSAL OF THE PRODUCT
BY THE HOLDER
ADMINISTRATIVE PENALTIES PROVIDED BY THE
REGULATIONS IN FORCE.

SAFETY DEVICES

ELECTRIC AND GAS FRY-TOPS WITH VALVE
SAFETY THERMOSTAT
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING
OBSERVING THE FOLLOWING RULES.
- The appliance is equipped with a manual reset
safety thermostat that interrupts heating when the
operating temperature exceeds the maximum
permitted value.
THE EQUIPMENT
IMPACTS ON THE
IMPLIES APPLYING
FROM FAILURE TO
- To restore appliance operation, remove the control
panel and press the thermostat reset button. This
procedure must only be carried out by a qualified,
authorized technician.
II.

INSTRUCTIONS FOR INSTALLATION

REMINDERS FOR THE INSTALLER

READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
FAILURE TO COMPLY WITH WHAT IS
PRESENTED
COMPROMISE THE SAFETY OF THE
EQUIPMENT.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING
OBSERVING THE FOLLOWING RULES.
- Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
- The appliance must be installed in a well-ventilated
room.
- Installation and conversion to a different type of
gas must be carried out by qualified technicians
authorized by the manufacturer, in compliance
with current safety standards and the instructions
in this manual.
- Appliance maintenance and conversion to a
different type of gas must be carried out by
qualified technicians authorized by the
manufacturer, in compliance with current safety
standards and the instructions in this manual.
- Do not obstruct any air vents or drains present on
the appliance.
- Do not tamper with appliance components.

REFERENCE STANDARDS AND LAWS

- Install the appliance in accordance with the safety
standards in force in the country.

UNPACKING

-
- Check the state of the packing and in the event of
damage, ask the delivery person to inspect the
goods.
- Remove the packing.
- Remove the protective film from the outer panels.
Use a suitable solvent to remove any residual
adhesive from the panels.
18
BELOW MAY
FROM FAILURE TO