Maintenance and cleaning
Before any cleaning or maintenance operation,
•
EN
always disconnect the appliance from the power
supply.
Periodically clean the appliance with a cloth and a
•
solution of lukewarm water and neutral detergent
specific for refrigerator interiors.
Never use detergents or abrasives. Never clean the
•
refrigerator parts with flammable liquids. The fumes
can cause fires or explosions.
Clean the outside of the appliance and the door
•
seals with a damp cloth and dry with a soft cloth.
Do not use steam cleaners.
•
Clean the condenser using a vacuum cleaner,
•
remove the front kickplate (see installation
handbook).
The buttons and control panel display (located on
•
the freezer door on some models) must be cleaned
with a dry cloth; do not use alcohol or
alcoholderived substances.
The refrigerant system pipes are located near the
•
defrost pan and can become very hot. Periodically
clean them with a vacuum cleaner.
24
Replacing light bulbs
Attention:
Always disconnect the refrigerator from the power
•
supply before replacing any light bulbs.
Before replacing the light bulb, remove the light
•
guard that may be present. This will have to be put
back after replacing the light bulb.
•
light bulbs with a bayonet type
mount. These do not need
unscrewing/screwing when
replacing.
•
water dispenser (if present) is
of the normal screw-in type.
Some models, however, may
have a Led light.
Compared to the traditional light bulb, LEDs last
•
longer, illuminate more effectively and respect the
environment.
Replace the lamp with one of the same type, available
from the After-sales Service or from authorised
dealers.
If the product has a LED light, contact Technical
Assistance when in need of a replacement.
The refrigerator accepts
The light in the ice and