GB
CONNECTING THE GAS CYLINDER
SAFETY NOTICE
!
RISK OF FIRE AND EXPLOSION
The gas grill can only be operated with a
pressure regulator. The enclosed pressure
regulator is correctly adjusted for operation
with liquefied gas ex works. Also read and
observe the assembly instructions and
instructions for use, which are separately
enclosed with the pressure regulator.
The gas hose may have to be replaced if
respective national regulations or the lifetime
of the hose line require this.
Gas hose and pressure regulator must be
replaced at regular intervals. (For this, please
refer to chapter Cleaning/Servicing.)
Get information at a specialist shop when
purchasing or renting gas cylinders.
REQUIRED TOOLS/AUXILIARY MATERIALS
Make sure that there are no sources of
ignition, open fire or the like in the vicinity,
when connecting or replacing the gas
cylinder.
Make sure that the gas hose does not have a
kink in it or is chafed and that its entire length
is accessible.
After installing the gas cylinder, please check
all connection points for leak tightness using
a commercially available leak detection spray
or soapy water. If there are no leaks, clean the
connections with water after the inspection.
Checking for leaks with an open flame is
strictly prohibited!
48