Controlling The Pt Camera With An Nvr - Lorex LNZ3522B Manual De Instrucciones

7
Controlling the PT Camera
with an NVR
The camera can accept Pan-Tilt commands directly through the Ethernet ca-
ble. There is no need to run special wiring to control the movement of the
camera.
• The following instructions are based on the Lorex LNR400 Series NVR. See your
NVR's instruction manual for instructions on controlling the PT camera with your
system.
• For the latest list of compatible NVRs, please visit
To connect the camera to the system:
1. Connect the camera to your NVR as detailed in 5 Connecting the Camera,
page 5.
2. Right-click and click Main Menu. Enter the system user name (default:
admin) and password (default: 000000) if prompted.
3. Click
4. Under Channel, select the channel the micro PT camera is connected to.
5. Under PTZ Type, select Remote.
6. Click OK. You can now control your micro PT camera using the system.
#LX400043; r. 1.0/19290/23171; en-US
NOTE
>Setting>Pan/Tilt/Zoom.
www.lorextechnology.com/support.
14