Safety Measures And Advice; Safety Measures And Advice On The Mi006 - CESVA MI006 Manual Del Usuario

Safety measures and advice

Read carefully this chapter before using the MI006.

9.1 Safety Measures and advice on the MI006


The MI006 should be connected to an electrical installation with earth
connection in good conditions.

Do not expose the MI006 to rain or water.

The MI006 has a Fuse protection. If the fuse blows; it must be replaced
immediately by

The MI006 is designed to work horizontally. Any other working positions
should be avoided.

The MI006 is light weighted equipment and although it has been designed to
be very robust, it should be treated with care when moving or handling it. It is
specially recommended to always pick it up by its grip.

This equipment only can work with the accessories mentioned in the
accessories section. In case that using a different accessories and that this
causes a failure in the equipment,
failure. Then the equipment will lose its warranty.

Always place the AN001 antenna in order to control the MI006 with the remote
control MA001 or through Bluetooth wireless technology.

Remember to fold or to remove the AN001 antenna before packing the MI006
in its carrying case.

Be especially careful with the folding orientation of the AN001 antenna. Since
this has a single folding direction and if it is not respected then the AN001
antenna could be damaged.
36
9. Safety measures and advice
technical Service department.
would not be responsible of this
Chapter 9
9
Safety measures and advice