Fellowes PowerTrim Manual Del Usario página 8

TROUBLESHOOTING AND LED INDICATORS
Status
Scissor icon is ON. Base LED lights
are ON
Scissor Icon is OFF. Base LED lights
are ON
Scissor Icon is OFF. Base LED lights
are OFF
Scissor icon is PINK + beep sound
Scissor icon flashing BLUE (FAST). Base
lights are ON
Scissor icon flashing BLUE (SLOW).
Base lights are OFF
Paper is cut, machine is still operating
Scissor icon flashes RED and BLUE.
Base lights are ON
Scissor icon is RED. Base lights are OFF Error. Machine is hot
Poor cut quality
8
Possible Cause
Ready to trim (clamped down and all
covers closed)
SafeCut Clamp is open
No power
SafeCut Guard is open
Touched scissor icon
Trimming in progress
PowerSave mode
Machine will cut for 3 cut cycles (or 6
cuts) automatically
Error
Worn cutting strips or worn blades
Solution
-
Insert item and close SafeCut Clamp
Turn on main supply and switch on
machine
Ensure SafeCut Guard is correctly
closed
-
-
Touch scissor icon.
Touch scissor icon.
Check SafeCut Clamp is closed and
SafeCut Guard is correctly closed
Machine must cool for 30 minutes
(minimum)
Flip cutting strip and use reverse side.
Check blade quality. Replace from
accessory pack (CRC 54125)