Carrera 571 Manual De Instrucciones página 36

When applying excessive pressure, the facial
● ●
cleansing brush will switch off automatically in
order to ensure gentle treatment. Use the on/
off switch to restart the facial cleansing brush.
If you would like to interrupt the cleansing
● ●
process, switch off the appliance by pressing
the on/off switch.
Store the brush heads with the protective caps
● ●
attached. Fig. 5 .
Before attaching the protective caps, the brush
● ●
heads must be clean and dry.
Makeup applicator
Apply some makeup to the makeup applicator.
● ●
Gently move the facial cleansing brush across your face using
● ●
circular motions.
The makeup is evenly distributed on your skin.
● ●
If you have applied too little makeup, repeat the process.
● ●
How to replace the brush attachments
1. Hold the brush handle with
one hand.
2. Use the other hand to carefully
remove the brush attachment
from the brush handle. Fig. 6 .
3. In order to replace the brush
attachment, carefully press it
onto the brush handle until it
locks in place with an audible
click. Fig. 7 .
Fig. 6
Fig. 5
Fig. 7
GB 35