Safety Instructions - Nilfisk-Advance SDS 424 Instucciones De Manejo

SDS 424
Single disc machine
Machine equipment
01 Handle bar
02 Brush motor switch
03 Housing of top shaft element
04 Swith lock
05 Shaft adjustment handle
06 Screws on switch cabinet
07 Bar
08 Cable hook
09 Wheels
10 Motor head
11 Brush
12 Outlet hose
13 Liquid tank
14 Tank holder
15 Tank lever
16 Water connector
17 Shaft adjustment unit
18 Electric cable
19 Drive plate for pads
20 Spraymaster
21 Pad
Accessories
Liquid tank
Spraymaster
Polishing brush (UNION)
Drive plate for SDS 424 (190 rpm)
Drive plate for SDS 424 (380 rpm)
Scrubbing brush (PPNO8) for SDS 424 (190 rpm)
Shampooing brush (PPNO,3) for SDS 424 (190 rpm)
8,5 kg extra weight
Pads
Sapur pad
These operating instructions are intended for operating staff.
1. Please familiarize yourself with the instructions and recommenda-
tions contained in these operating instructions before setting up,
commissioning and servicing the machine.
2. You will then have full control over the machine and use it effi-
ciently. The care and maintenance described in these operating in-
structions are in the interests of your own safety and preserve the
machine's value.
3. The manufacturer accepts no liability for personal injury or damage
to property due to the incorrect use of this machine.
Please read the safety instructions carefully!

Safety instructions

Before commissioning the single-disc machine, please read these
instructions carefully and keep them handy at all times.
The single-disc machine may only be used by persons trained in its
use and explicitly entrusted with its operation.
Warning!
The single-disc machine is not suitable for cleaning surfaces which
release health-hazardous dusts and liquids. Do not use the machine
on steps.
Caution!
Never drive the machine over electric cables. Danger of electric
shocks!
General remarks
The operation of the single-disc machine is subject to the currently
valid national regulations.
It is essential to observe not only the operating instructions and the
binding regulations on accident prevention valid in the country of use,
but also the generally acknowledged rules for safe and correct working
procedures. No methods involving safety risks must be employed. The
use of automatic machines on public paths and roads is prohibited.
Correct use
•
All single-disc machines are intended exclusively for use in build-
ing interiors.
•
Any use beyond this is considered incorrect. The manufacturer
accepts no liability for any resultant damage; the user alone bears
the risk.
•
Correct use also includes adherence to the operating, servicing
and maintenance conditions recommended by the manufacture.
•
The relevant accident prevention regulations as well as all the
generally acknowledged safety and working practices must be fol-
lowed.
•
Unauthorized modifications to the machine exclude the manufac-
turer's liability for resultant damage.
•
Before machine use, floorcoverings must be tested for suitability
for this cleaning process.
•
Pay attention to the area compression of point-elastic floors, e.g. in
gymnasiums
•
The manufacturer accepts no liability for damage to equipment and
to the floor being cleaned from using the wrong brushes and
cleaning agents.
Product liability
The operator's attention is drawn explicitly to the fact that the ma-
chines may only be used for their intended purpose. If the machines
are not used for their intended purposes, the user must accept full
responsibility. Any liability of the manufacturer ist thus excluded.
Sources of risk
•
When the machine is stationary, the brush unit must be immedi-
ately switched off to prevent damage to the floorcovering.
•
During transportation in lifts, the currently valid user instructions
and safety regulations – and particularly those concerning maxi-
mum loading – must be observed.
Machine operation position
The machine operation position is behind the machine.
Approved maintenance staff
The single-disc machine may only be serviced and repaired by per-
sons with technical and legal authorization.
Cleaning agents
•
When using cleaning and care agents, the manufacturer's danger
warnings must be followed and protective goggles and clothing
must be worn.
•
Only muse low-foaming, non-combustible cleaning agents which
do not contain generally health-hazardous substances.
GB