Panel Lock - Toshiba REGZA A3000 Serie Manual Del Usuario

Panel lock, time display,
stereo/bilingual transmissions, the timer

Panel lock

Panel lock disables the buttons on the television. All
buttons on the remote control can still be used.
From the FUNCTION menu select Panel lock
1
and choose On or Off using left or right.
FUNCTION
Teletext
Panel lock
Auto format
4:3 stretch
Blue screen
Side Panel
Back Watch TV
MENU EXIT
When Panel lock is On, a reminder will appear when
the buttons on the television are pressed. If the standby
button is pressed the television will switch off and
can only be brought out of standby by using the
remote control.
The Time Display
The time display facility allows the current (text service)
time to be seen on the television screen.
Press / whilst watching a normal television
8 9
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo... Press I/II to select Stereo or Mono.
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press I/II to select Dual 1, Dual 2 or Mono.
O
1
Auto.
On
On
Off
On
1
2
3
4
21
The Timer
The television can be set to turn itself On or Off after a
certain time.
Press MENU and left or right to select the TIMER
menu.
TIMER
Sleep timer
On timer
On timer Position
Back Watch TV
MENU EXIT
Press down to select On or Sleep timer. Use the
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30, or press right to
increase/decrease in steps of 10 minutes.
If setting the Sleep timer, press EXIT to finish. If
setting the On timer, press down to select On
timer Position, enter the programme position
number required, then press
television into Standby. The GREEN On timer
indicator on the front of the television will now
be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the television
can be switched on at any time by pressing
The GREEN On timer indicator will remain on
until the set time period as passed when the
television will go to the chosen channel. This
feature can help to avoid missing favourite
programmes.
To cancel the On timer/Sleep timer, enter zero
in each position.
01:30
00:00
01
to put the
i
i .