Description Of The Device; Intended Use; Corrosion Protection; Construction And Fitting Dimensions - Reflex Storatherm Aqua 300-2 Manual De Instalación Y Mantenimiento

Description of the device

2 Description of the device
2.1

Intended use

This heater is suitable for combined use with solar panels and a heat pump. This heater must only be used for heating potable water.
It is not intended for any other use. There shall be no claim for liability for any damage resulting from improper use.
2.2

Corrosion Protection

This hot water heater is equipped with enameling suitable for potable water in accordance with DIN 4753 Part 3. This coating does not react with
standard installation materials and process waters. A magnesium anode has been integrated for additional protection.
2.3

Construction and Fitting Dimensions

Diagram of this heater series.
Note!
Heater connections. Compare with the installation note attached tot he device in the factory.
KW Cold water
WW Hot water
ZL Circulation (optional)
F Probe pin
FS Solar probe pin
WVL Supply heating coil
WRL Return heating coil
SVL Supply solar coil
SRL Return solar coil
EHP E-heating cartridge (optional)
FL Flange / inspection port
4 — English Indirectly fired hot water heater — 06.2017