BOND MANUFACTURING HYFP50085-3 Manual Del Usuario página 6

ASSEMBLY
*Please keep the owner's manual for future reference
*If you have opened the carton and removed all packages, please disregard STEP 1. See
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
(1) Check each part before using the
product. Make sure the gas
supply system is turned "OFF"
before assembling. See Figure I.
(2) Locate the battery, remove the
plastic cover first. Unscrew the
rubber cap of the Electric Ignitor,
place a AAA battery into the
battery case. Make sure the
positive pole ("+") is towards the
cap. Screw the cap back to the
battery case tightly. See Figure II.
(3) Place the lava rocks (9 kgs)
evenly in the fire bowl on the top
of the fire pit. See Figure III.
(4) Put the gas tank in the metal
stand. Make sure the gas tank
sits on the metal stand
completely. Turn the wing screw
on the outer part of metal stand
clockwise to secure the gas tank
tightly. See Figure IV & V.
See "LP (Liquid Propane) gas supply connection" section for tank connection.
WARNING:
** DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks
into the firebowl. Always keep Ignition
Screen visible. This screen must be
clear and free of obstructions at all
times to insure proper operation.
The burner of the appliance must be
covered by lava rocks completely.
Otherwise the flame may be
extinguished partially. See the Figure
CORRECT and INCORRECT for
reference.
INSTRUCTIONS____________ ___________
STEP 2 directly.
CORRECT
6
INCORRECT