Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
en
Problem
Unit does not operate
No mist output
Weak mist output
White deposit around the
appliance
Storing the appliance for extended periods
Clean the appliance as described earlier and allow to dry
thoroughly. Preferably store the appliance in its original box,
in a dry place away from high temperatures.
Legal notice
The AC/DC adapter is cUL-listed.
Subject to technical change. The instructions for use are
protected by copyright © PLASTON AG.
16
Possible cause
Appliance has no power
No water in the tank
(Red water level indicator is illuminated)
Mist output setting too low
Residue of cleaning agent
Demineralization cartridge is clogged
Water temperature too low
Mineral deposits on membrane
Demineralization cartridge exhausted
Accessories
Contact your local retailer or check our website
www.airoswiss.net for reorder information.
Customer Service
Customer Service (USA) 1-800-336-0326
www.airoswiss.net
What to do
Connect appliance to power socket
Fill tank with water
Increase mist output
Rinse with clear water
Remove 2-3 teaspoons of granules from the
cartridge and dispose of them.
Soak cartridge in water for 24 hours
Set mist output to maximum. The
appliance will work properly again
after 10 minutes.
Clean membrane
Replace demineralization cartridge or granules
Used granules must go in waste
Technical data
Electrical voltage
100 – 240 V / 50-60 Hz
Power consumption up to
Humidity output up to
1.8 gallons / 24h (6.8 L / 24 h)
Suitable for rooms up to
Dimensions (LxWxH)
9.5 x 4.7 x 10.4 inches
(24 x 12 x 26.3 cm)
Weight (empty)
Operating noise level
Accessories
7531 Demineralization cartridge
20 W
430 sq ft (40 m
)
2
4 lbs (1.8 kg)
< 25 dB(A)
Hydro Cell A200
EZCal A7417
EZCal Pro A100
Publicidad
