Problems And Fault Remedy - Silit Ecolare Indicaciones De Manejo Y Cuidado

Problems |Fault remedy
Situation
Neither the stand-by display nor a function
display (temperature or power output) is lit
up.
No heat is generated in the pot; "E " appears
on the display.
The display shows "E ."
The display shows "E ," "E ," "E ," "E ," "E "
or "E ."
Never make repairs yourself. It is imperative to commission a professional, i.e. an
authorized service (for ex. customer services).
16
Measure to take
. Switch on rear of device is not turned on.
. Connecting cable is not inserted. Insert plug
properly.
. Safety fuse has responded. Inspect fusing and
compare with technical specifications for
device!
. Fuse in device has responded. Bring device to
an authorized service point for inspection.
. Unsuitable cookware. Use induction-compati-
ble cookware.
. Pot is not centered on the cooking zone.
Center pot.
. The cookware has been tossed or taken off
the induction hob shortly. The field which
generates heat is thus interrupted and error
message "E " appears.
. Device is in operation without cookware.
. The device is defective. Pull the plug and bring
the device to an authorized service point (for
ex. customer services) for inspection.
. Protection against overheating (~
responded (if foods are fried at high tempera-
tures over long periods of time). Please allow
to cool down for several minutes.
. An air inlet or outlet is blocked. Keep opening
clear and select a suitable place for operation
(sucked in table cloths clog the opening un
derneath the device, for example). Operate the
device on a smooth, solid surface.
The device is defective. Pull the plug and bring
the device to an authorized service point (for
ex. customer services) for inspection.
Consult the manufacturer's customer service.
°C) has