16-676-01
- When mounting the appliance in a 19"-rack, you can remove the provided rubber legs. Apply lateral pressure to the legs to remove them from the appli-
ance (fig.2).
fig.2: removing the rubber legs
3. OPERATION ANd USE
If an interface (external unit with camera) or a camera interface (external camera) is connected to one of the interface input terminals (fig.1, SO1, SO2,
SO3 or SO4), the image of one of the cameras can be displayed on all programmed internal units. Program the addressable video signal via the interface
(see user manual 16-651).
The programmed internal units are called via a speech-controlled programming (see user manual 16-651).
Without a telephone exchange, the internal units and other telephones cannot be called. Moreover, you can create groups with most telephone exchanges.
Please consult the user manual of the telephone exchange.
4. TECHNICAL dATA
Dimensions: .........................................L 483 x W 213 x H 55mm
Weight:................................................3.800g
Operating temperature: ........................0 to 40°C
Enclosure: ...........................................metal
Connector to interface: .........................RJ45 (or camera interface)
Connector to internal units: ...................RJ45
Connector to telephone exchange: ........screw connector
Power supply: ......................................230V (±10%)
Video outputs: ......................................amplification 1 x with respect to video output
Max. load:............................................4.5A (24V)
Choice of the telephone exchange: ........contact the Niko support service for a list with the approved telephone exchanges.
5. LEGAL WARNINGS
- The installation has to be carried out by a qualified person and in compliance with the statutory regulations.
- This user manual has to be handed over to the user. It has to be included in the electrical installation file and has to be passed on to any new owners.
Additional copies are available on the Niko website or via the support service.
- During installation, the following has to be taken into account (not limited to list below):
- The statutory laws, standards and regulations;
- The state of the art technique at the moment of installation;
- This user manual, which must be read within the scope of each specific installation, only states general regulations;
- The rules of proper workmanship
- In case of questions, you can consult Niko's support service or contact a registered control organisation.
Support Belgium:
+32 3 778 90 80
website : http://www.niko.be
e-mail: support@niko.be
In case of a defect, you can return your product to a registered Niko wholesaler, together with a clear description of your complaint (Conditions of use,
stated defect...).
6. GUARANTEE PROVISIONS
- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is no invoice,
the date of production applies.
- The consumer is obliged to inform Niko in writing about the defect, within two months after stating the defect.
- In case of a failure to conform, the consumer has the right to a repair or replacement (decided by Niko) free of charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation, improper or careless use or wrong usage or transformation of the
goods.
- The compulsory regulations of the national legislation concerning the sales of consumer goods and the protection of the consumers in the countries where
Niko sells, directly or via sister or daughter companies, chain stores, distributors, agents or permanent sales representatives, take priority over the rules
and regulations mentioned above.
8
Support UK:
+44 1525877707
http://www.nikouk.com
sales@nikouk.com
EN