Safety Instructions - DENTAURUM Tomas Modo De Empleo

5.4 tomas -laboratory pin
®
The tomas -laboratory pin is the laboratory analog for the respective tomas
®
Before making the model, make sure the tomas
impression material. Then stick the tomas
With the tomas -laboratory pin EP, the direction is irrelevant.
®
If you want to reproduce the exact slot position of the tomas
the arrows on the base of the tomas
analog. These markings show the course of the slots and serve as guide when placing the
tomas -laboratory pins SD (see Fig. 4 + 5).
®
The tomas -laboratory pin must be fixed securely within the impression cap. In order
®
for the tomas -laboratory pin not to loosen from the tomas
®
filling process of the impression material, it is important to fix the pins with wax. Then,
make the model.
6. Composition
The composition is included in the materials list; please refer to the catalog or
www.dentaurum.com.

7. Safety instructions

The product should not be used if there is a known allergic reaction to one or more of
the material components.
8. Information for single use products
The tomas -abutments, tomas
®
for single use only. Reconditioning of products that have been inserted previously or
reuse on patients is not permitted.
9. Quality information
Dentaurum ensures faultless quality of its products. These recommendations are based
upon Dentaurum´s own experiences. The user is responsible for the processing of the
products. Responsibility for failures cannot be taken by Dentaurum as we have no
influence on the processing on site.
10. Explanation of symbols used on the label
Please refer to the label. Additional information can be found at
www.dentaurum.com (Explanation of symbols REF 989-313-00).
-transfer cap is securely fixed within the
®
-laboratory pin into the tomas
®
-transfer caps as a guide to align the laboratory
®
-transfer caps und tomas
®
-transfer cap.
®
-pin SD, you can use
®
-transfer cap during the
®
-laboratory pins are designed
®
EN
-pin.
®
19