Kenmore Connect ™ System - KENMORE ELITE 796.6155 Serie Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Should you experience any problems with your
dryer, it has the capability of transmitting data via
your telephone to the Kenmore Connect Team. This
gives you the capability of speaking directly to our
specially trained technicians. The technician records
the data transmitted from your machine and uses it
to analyze the issue, providing a fast and eff ective
diagnosis.
Using the Kenmore Connect
First, call 1-844-553-6667 (U.S.A.) or 1-800-469-4663 (Canada). If the number of the phone you are using is on
fi le and is associated with your dryer, you will be quickly relayed to a Kenmore Connect team agent. Follow the
technician's instructions and perform the following steps only when requested to by the Kenmore Connect Team
agent.
HOLD
the call center, no more than one inch from (but not touching) the machine.
NOTE: Do not press any other buttons or turn the cycle selector knob.
PUSH
POWER button.
LISTEN
phone in place until the tone transmission has fi nished. The display will count down the time.
Once the countdown is over and the tones have stopped, resume your conversation with
the technician, who will then be able to assist you in using the information transmitted for
analysis.
NOTE:
• For best results, do not move the phone while the tones are being transmitted.
• If the call center agent is not able to get an accurate recording of the data, you may be
asked to try again.
• Pressing the POWER button during the transmission will shut off Kenmore Connect.
Kenmore Connect
System
the mouthpiece of your phone over the POWER button, when instructed to do so by
and hold the TEMP button while continuing to hold your phone to the
for two beeps. After you hear the two beeps, release the TEMP button. Keep the
System
If you experience problems with your dryer, in the
U.S.A. call 1-844-553-6667 and in Canada call
1-800-469-4663. Only use the Kenmore Connect
System feature when instructed to do so by the
Kenmore Connect Team. The transmission sounds that
you will hear are normal and sound similar to a fax
machine.
Kenmore Connect cannot be activated unless your
dryer is turned on by pressing the POWER button. If
your dryer is unable to turn on, then troubleshooting
must be done without using Kenmore Connect.
39

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

796.7155 serie

Tabla de contenido