Technical Characteristics - LEM LTA330 Manual De Istrucciones

Model
Typology (MDD 93/42/EEC)
Classification UNI EN ISO 10079-1
Main Voltage
Power consuption
Fuse
Maximum suction aspiration (without jar)
Maximum flow (without jar)
Weight
Dimension
Functioning (to 35°C and 110 % operating voltage)
Silicone Size Tube
Accurancy Of Vacuum Indicator
Working condition
Conservation condition
~
Hz
I
0
II
The surgical aspirator ASPIMED 3.3 is intended for use in the electromagnetic environment specified below.
The customer or the user of the surgical aspirator ASPIMED 3.3 should assure that it's used in such an environment.
Emissions test
Irradiated / Conducted emissions
CISPR11
Irradiated / Conducted emissions CISPR11
Harmonic emissions IEC/EN 61000-3-2
Voltage fluctuations / flicker emissions
IEC/EN 61000-3-3

TECHNICAL CHARACTERISTICS

Class 2 isolation equipment
CE marking in conformity with EC directive 93/42/CEE and subsequent changes
Manufacturer: CA-MI Srl - Via Ugo La Malfa n°31 - 43010 Pilastro (PR) Italy
Warning, consult the instruction manual
Type B equipment
Fuse
To preserve in place coolness and dry land
Conservation temperature: - 40 ÷ 70° C
Alternate current
Mains frequency
ON
OFF
Remote Control
Guidance and manufacturer's declaration – electromagnetic Emissions
Compliance
Group 1
Class [B]
Class [A]
Complies
Medical Device Class II a
HIGH VACUUM / HIGH FLOW
- 90kPa / -0.90 Bar / - 675mmHg
Room temperature:
Room humidity percentage:
Altitude:
Room temperature:
Room humidity percentage:
SYMBOLS
Electromagnetic environment - guidance
The surgical aspirator ASPIMED 3.3 only used RF energy only for its
internal functioning. Therefore, its RF emissions are very low and
are not cause interference in proximity of any Electronic appliances.
The surgical aspirator ASPIMED 3.3 can be used in all
environments, including domestic and those connected directly to
the public mains distribution that supplies power to environments
used for domestic scopes.
10
ASPIMED 3.3
230 V ~ / 50 Hz
230 VA
F 1 x 4 A 250 V
60 l/min
13 Kg
600 x 460 x 420 mm
Non – Stop Operated
Ø 8 x 14 mm
± 5%
5 ÷ 35 °C
30 ÷ 75 % RH
0 ÷ 2000m s.l.m
- 40 ÷70 °C
10 ÷ 100% RH