9. Transport and storage
During transport and storage, the TA test plate should
GB
be kept in its original packaging with its user manual.
10. Discarding of waste and protection
of the environment
The anchor point TA test plate can only be used once.
A special storage procedure or waste discarding
procedure must be provided to the operator and
applied by the operator to ensure compliance with the
applicable environmental protection regulations.
11.1. Test plate marking
1
4
3
1. TA Test plate shear load (CR).
2. Manufacturer's Logo: TRACTEL
3. "Please read the instruction manual" logo.
4. Test plate reference code.
5. Test plate serial No.: 14/XX Plate manufactured
in 2014.
6. Description.
11.2. Test plate batch marking
A label is applied onto the plastic bag containing the
batch of test plates and the instruction manual.
This label displays the following information:
8
11. Markings
Fig. 8
.
®
2
6
4
1. Number of test plates in the batch.
2. Manufacturer's Logo: TRACTEL
3. Obligation to read these instructions.
4. Test plate batch code.
5. Test plate serial No.: 14/XX Plate manufactured
in 2014.
6. Description.
5
2
6
3
5
1
Fig. 9
.
®