Setting The Oven Controls - Kenmore 790.4061 Serie Manual De Uso

Setting Oven Controls
NOTICE : The illustrations and instructions contained in this document only refer to the upper oven operations.
Before every operations, you must select the proper oven which will be in use. All these instructions can also be
applied to the lower oven by selecting the Lower Oven Pad on the right hand side of the control panel.
Note: The time of day
must first be set in
order to operate
the oven.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 288°C).
To Set the Controls for Normal Baking:
Bake
Bake
. "— — —" appears and "BAKE" will flash in the display.
1. Press
2. Within 10 seconds, press the
, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).
3. 3 seconds after the
the displayed temperature reaches the desired baking temperature, the control will beep once.
4. To cancel the baking function, press
To Change the Oven Temperature after Baking has Started
Bake
Bake
1. Press .
2. Press the or
To Set Control for Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
Timer
Set/Off
1. Press and hold
to switch between 12 Hour Energy Saving and Continuous Bake features. Note: "12h" in the
2. Press or
display indicates the control is set for the 12 Hour Energy Saving mode and "--h" indicates the control is set
for Continuous Bake feature.
3. Wait 5 seconds to accept the changes or press
To Set Control for Oven Lockout
The control can be programmed to lock the upper oven door and lock both oven control pads, except for the
timer, clock and oven light.
To Set Control for Oven Lockout feature for the Upper Oven:
STOP
and hold for 3 seconds. After 3 seconds "LOCKED" and "DOOR" will flash in the display and
1. Press Clear
a beep will sound. Once the oven door is locked
seconds for the oven door to lock.
2. To cancel the Oven Lockout feature, press
from the display and "LOCKED" and "DOOR" will flash until the oven door has completely unlocked. The wall
oven is again fully operational.
. The display will show "350°F (177°C)". By pressing and holding
or
or pad is released, the oven will begin heating to the selected temperature. When
STOP
Clear
pad to increase or decrease the set temperature.
down for 7 seconds. After 7 seconds "12h" will appear in the display.
.
STOP
Clear to cancel and return to the time of day display.
and "Loc" will appear in the display. Allow about 15
STOP
Clear and hold for 3 seconds. A beep will sound.
9
or
will disappear