Storage; Specifications - Maruyama BL3200 Manual Del Operador

Storage

For long term storage of the Handheld Blower:
1. Empty the fuel tank into a suitable fuel storage
container approved for gasoline.
2. Pump the primer bulb on the carburetor until all fuel is
discharged through the clear fuel return hose.
3. Run the engine to remove any fuel that may remain in
the carburetor.
4. Perform all regular maintenance procedures and any
needed repairs.
Remove the spark plug and squirt a very small amount
5.
of oil into the cylinder.
6. Pull the starter grip once.
7. Slowly pull the starter grip to bring the piston to the
top of the cylinder (TDC).
8. Reinstall the spark plug.
9. Store the Handheld Blower in a dry place away from
excessive heat, sparks or open flame

Specifications

Model
Dimensions L x W x H
Dry Weight ※1
Engine Displacement
Ignition System
Carburetor
Fuel Tank Capacity
Gas to Oil Ratio
Spark Plug
Spark Plug Gap
CARB Approved
Emission durability of 300 hours.
※1. Dry weight without Pipe A and B
BL3200, BL32, BL32-1
12.8 x 10.0 x 14.6in (325 x 255 x x370mm)
9.5lbs (4.3 kg)
30.1 cm
Solid State
Walbro Diaphragm Type
0.53 qts. ( 0.5L)
50:1
NGK BPM8Y
.024 -.028 in (0.6 - 0.7 mm)
Tier 3
US- 19 -
3