Kuppersbusch EEBP6260.0 Manual Del Usuario página 24

Programming the Timer Alert
1 Touch the symbol on the glass surface.
It will begin to flash. 0:00 will appear on the
display and the
2 Set the alarm time by touching the
symbols.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the alert sounds.
4 An alarm will sound at the end of the pro-
grammed time.
5 Touch any symbol to stop the alarm. The
symbol will turn off.
You can change the timer at any time by tou-
ching the symbol and later the
symbols. They will then light up. The two
beeps you hear after that will confirm the new
time has been set.
Programming Cooking Time
1 Touch the symbol on the glass surface.
It will begin to flash. 0:00 will appear on the
display and the
2 Touch the or
the cooking time.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the oven switches off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
6 Touch any symbol to stop the signal. The
oven will turn on again.
24
and will light up.
symbol
and
and will light up.
symbols to programme
symbol
7 Set the controls to 0 to turn off the oven.
You can change the timer at any time by tou-
ching the
symbols. They will then light up. The two
beeps you hear after that will confirm the new
or
time has been set.
Programming the Cooking Stop Time
1 Touch the
It will begin to flash. The current time will
appear on the display and the
will light up.
2 Touch the
the cooking stop time.
3 The alarm will be confirmed by two beeps
and the display will show the current time,
while the
cate that the oven will switch itself automa-
tically.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn
off, an audible signal will sound and the
symbol will flash.
6 Touch any symbol to stop the signal. The
oven will turn on again.
7 Set the controls to 0 to turn off the oven.
You can see the set cooking stop time by tou-
ching the
ge the timer setting by using the
symbols, which will light up. The two beeps
you hear after that will confirm the new time
has been set.
You can use this function even if you are coo-
king with the oven. If this is the case, follow
all of the above instructions except No. 4.
symbol and later the
symbol of the glass surface.
or symbols to programme
symbol will remain lit to indi-
symbol. You can then also chan-
and
and
and