Special Menu Setup [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the
communication configuration when a receiver is used. The following settings are performed on
the "SPECIAL SETUP" screen through the top screen. Refer to pages 16 - 17 for how to call up
the screen.
**SPECIAL SETUP**
CHROMA GAIN
AP GAIN
PEDESTAL
PIX OFF
CAMERA RESET →PUSH SW
SER.NO. XXXXXXXX
RET TOP END
Chroma level adjustment [CHROMA GAIN]
Use the right or left button to adjust the color density of the camera image. When the level indi-
cator moves in the "+" direction, the color becomes deeper. When the level indicator moves in
the "-" direction, the color becomes lighter. Be sure to view a vector chromaticity indicator or a
monitor when the adjustment is performed.
Aperture level adjustment [AP GAIN]
Use the right or left button to adjust the image quality. When the level indicator moves in the "+"
direction, the image becomes sharper. When the level indicator moves in the "-" direction, the
image becomes softer. Be sure to view a monitor when the adjustment is performed.
Note:
• Moire (interference fringes) may be observed when shooting a subject with fine pattern
such as a carpet or a curtain. In such a case, move the indicator in the "-" direction to
reduce moire.
Pedestal level adjustment [PEDESTAL]
Use the right or left button to adjust the pedestal level of the camera. When the level indicator
moves in the "+" direction, the image becomes brighter. When the level indicator moves in the "-
" direction, the image becomes darker. Be sure to view a waveform monitor or a monitor when
the adjustment is performed.
50
···I···128
···I···128
···I···128
–
+
O