Speaker Wiring - Jensen POWER 5500 Manual De Instalación Y Operación

Speaker Wiring

The Speaker Wiring diagrams illustrate options for connecting four speakers
and one subwoofer or two speakers and two subwoofers, or two speakers and
one subwoofer. Observe the proper speaker polarity.
NOTE: Power amplifiers can drive speakers with a nominal impedance
range of 2~ 4-ohms. For maximum power, configure your speakers for a
nominal 2-ohm load. Bridged amplifier channels can only drive 4 ohm
minimum impedance speakers.
NOTE: Do not overlook the use of the proper gauge speaker wire. The
Power series of amplifiers require a minimum of 12-gauge wire.
Four Speakers and Subwoofer
MODE
4CH 5CH
+ CH1 -
CH 3/4
FULL HPF
CH 1/2
FULL HPF
+ CH3 -
4 ohm nominal
2 ohm minimum
4 ohm nominal
2 ohm minimum
+ CH2 - CH5 -
Subwoofer
4 ohm nominal
+ CH5
+ CH4 -
2 ohm minimum
Two Speakers and Two Subwoofers
MODE
4CH 5CH
+ CH1 -
CH 3/4
FULL HPF
CH 1/2
HPF
FULL
+ CH3 -
Subwoofer
4 ohm nominal
Two Speakers and Subwoofer
MODE
4CH 5CH
+ CH1 -
CH 3/4
FULL HPF
CH 1/2
FULL HPF
+ CH3 -
5
POWER 5500 5-Channel Amplifier
4 ohm nominal
2 ohm minimum
+ CH2 - CH5 -
Subwoofer
4 ohm nominal
+ CH4 - + CH5
2 ohm minimum
4 ohm nominal
+ CH2 - CH5 -
Subwoofer
4 ohm nominal
+ CH4 - + CH5
2 ohm minimum
4 ohm nominal