Chap.3 - The Arrival Of The Machine; Despatch Of The Machine; Package Check Upon Receipt; Packaging Disposal - Mastro 40M-50M2 Manual De Instrucciones

CHAP.3 - THE ARRIVAL OF THE MACHINE

3.1 - DESPATCH OF THE MACHINE (see FIG. n°3)
The DISPENSER is accurately packed and then despatched from our warehouse.
The package includes:
a) a strong cardboard box + inside protections;
b) the machine;
c) this manual;
d) EC conformity declaration;
e) film roll (upon require).
a)
c)
FIG. n°3 - Package description
b)
e)
d)
8

3.2 - PACKAGE CHECK UPON RECEIPT

If no external damage is evident on the package upon its arrival, open it and check
that all the components are inside (see FIG. n°3). If the package has suffered
rough handling, bumps or crashes, the carrier must be informed about any
damage; moreover a detailed report on the extent of the damage caused to the
machine must be filled within three days from the delivery date shown in the
shipping documents. Do not overturn the package!! When the package is
transported, make sure the box is lifted by the 4 corners (parallel to the ground).

3.3 - PACKAGING DISPOSAL

The components of the packaging (cardboard, eventual pallet, plastic straps and
polyurethane) are urban solid waste; therefore they can be easily disposed.
If the machine has to be installed in countries where specific regulations are in
force, packaging must be disposed in compliance with them.

CHAP. 4 - INSTALLATION

4.1 - SETTING UP OF THE MACHINE

The machine must be installed on a working table suitable for its overall
dimensions shown in Tab. 1, therefore it must be adequately large, well levelled,
dry, smooth, resistant, stable and placed at a height of 80 cm from the ground.
Moreover the machine must be installed in a room with max. 75% not saline
humidity at a temperature between +5°C and +35°C; that is to say in a place that
does not provoke the machine failure.

4.2 - ELECTRICAL CONNECTIONS

Tha appliance is equipped with a power supply cord which section is adequate to
the absorb power and with a "SUKO" plug.
Connect the appliance to 230 Volt 50 Hz, by interposing a differential-
magnetothermic switch of 10A, ∆ I = 0.03A. Check that the earthing is fully
operational. Moreover check that the features on the rating plate - serial number
(see FIG. n°4) correspond to the features shown in the consignment and delivery
note, and that the disconnecting plug and the socket are easy to reach when the
machine is functioning.
FIG. n°4 - Rating plate-serial number
9