Personal Safety - Parkside PAK 20-Li B2 Traducción Del Manual De Instrucciones Original

2) ELECTrICAL SAFETy
a) Power tool plugs must
match the outlet. Never
modify the plug in any
way. Do not use any
adapter plugs with eart-
hed (grounded) power
tools. Unmodified plugs and
matching outlets will reduce risk
of electric shock.
b) Avoid body contact with
earthed or grounded
surfaces, such as pipes,
radiators, ranges and
refrigerators. There is an in-
creased risk of electric shock if
your body is earthed or groun-
ded.
c) Do not expose power
tools to rain or wet condi-
tions. Water entering a power
tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or un-
plugging the power tool.
Keep cord away from
heat, oil, sharp edges or
moving parts. Damaged or
entangled cords increase the
risk of electric shock.
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operation of the power
tool in a damp environ-
ment is unavoidable,
please use a residual cur-
rent circuitry. The use of a
residual current circuitry reduces
the risk of an electric shock.

3) PErSoNAL SAFETy

a) Stay alert, watch what
you are doing and use
common sense when ope-
rating a power tool. Do
not use a power tool whi-
le you are tired or under
the influence of drugs,
alcohol or medication. A
moment of inattention white
operating power tools may re-
sult in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional star-
ting. Ensure the switch is
in the off-position before
connecting to power sour-
ce and/or battery pack,
picking up or carrying the
tool. Carrying power tools
with your finger on the switch
or energising power tools that
have the switch on invites acci-
dents.
d) remove any adjusting
key or wrench before tur-
ning the power tool on. A
wrench or a key left attached to
a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep
proper footing and ba-
lance at all times. This en-
GB MT
39