Vollrath LidSaver 3 Manual Para Operadores página 3

MAINTENANCE
Tune-Up Your LidSaver™
When lids do not dispense correctly your LidSaver™ may need to be adjusted. Order a tune-up kit. See www.Vollrath.com for ordering information.
TROUBLESHOOTING
Problem
More than one lid releases when
opening door
Inconsistent dispensing
™
LidSaver 3 Lid Dispensers Operator's Manual
Might be Caused By
The wrong lid may be loaded into the
dispenser.
The dispenser may be overfilled with too
many lids. Overfilling compresses the
lids making them difficult to dispense.
Pager flipper may have not returned to
proper position after the loading lid
stack.
Pager not securely fastened down.
Due to manufacturing defects or
changes, damaged lids, poorly stacking
lid types, some lids may not dispense
well.
Course of Action
Refer to the code on lid plate. It should match the code of the lid
you are trying to dispense. If it does not match, either you have
inserted the wrong lids or the dispenser needs to be retro-fitted to
dispense a different type of lid. Insert the correct lids or order a Lid
Change Kit.
Remove lids and fan or flake the stack. Insert fewer lids.
Clean the pagers. Refer to the Cleaning section in this manual.
Test each pager to determine if it is loose and allows movement
within the adjustment slot. If yes, order a Tune-up Kit to reset the
pagers.
Consult the lid manufacturer to determine if there have been
material or design changes to your lid.
Consider switching to higher quality lid. Order a Lid Change Kit to
enable your LidSaver to dispense the new lid.
3