Troubleshooting Guide - ClearSounds A50 Guía De Instalación Y Manual De Usuario

Dimensions:
Handset Size: 6" X 2.25" X 1"
Base Size: 5.5" X 4" X 2.5"
Weight: 11.2 oz with batteries
Power Requirements:
120VAC-60Hz-18W / 12VDC-500mA
Batteries: (3) AAA NiMH Batteries (included)
If you experience trouble with your ClearSounds A50, please try the suggestions below
before calling for help.
For Customer service call 1-800-956-9043 V or 1-888-814-5359 TTY. Please retain your
receipt as your proof of purchase
1. If the phone doesn't work at all, check these items first:
· Adjust the volume controls.
· Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.
· Make sure the AC adapter is securely plugged into the base and AC outlet.
· Make sure the telephone modular line cord is plugged firmly into the base and the
modular jack.
· If the handset does not beep when you press the
charging.
· Make sure the batteries are installed correctly.
· Make sure the battery was charged 24 hours prior to the first use.
· Make sure you are in the usable range of the base.
· Make sure the handset is off-hook.
· Reset the security code by placing the handset in the base for 5-10 seconds.
If the above suggestions don't solve the problem, try re-initializing the Handset a Base:
1. Disconnect the power to the base
2. Remove the handset batteries
3. Wait a few minutes
4. Connect the power to the base
5. Insert the handset batteries
6. Put the handset in the base to re-initialize
2. If you hear a two-beep signal when you try to use the Handset:
· You might be out of range. Move closer to the base and try again.
· If moving closer to the base doesn't help, try following the direction above for
re-initializing the handset and base.

Troubleshooting Guide

, the battery might need